How To Complete the Wire Wrapped Pendant Bail

Final Wire Wrapping The Bail

On my last post of this series this is where we left the pendant with the bail completed but unadorned. Now we get to the fun part! This is the very best bit for me as I get to express myself trying to make different bends each time. This is where we can create visual interest and show our own style. The world and his brother makes jewellery and we want to be different to them.

Placing my thumb below and finger above I pull outwards on the wires which will cause them to warm and soften as well as putting a gentle bend into them. Doing this a few times will allow you to increase the curve and soften the wires even more which will help in forming them.

Continuing to hold the wires as before I rub the wires with my thumb and place gentle downwards pressure with my finger where I will be making the bend. This softening will allow you to create a nice, gentle curve.

Gripping the end of the wires between thumb and finger I will gently pull the wires down and to the right until they are roughly in the position I want them.

I like to separate my wires to make them more interesting. I will keep them together for some designs but doing it this way makes it look more complex and interesting. It drives my Son crazy trying to work out how I have bent my wires on finished pieces!

Gripping the wires in the 'elbow' of the bend and pressing them together will start them separating.  taking the ends of the wires I will gently pull them until they are equal and uniform and most pleasing to the eye.

The wires can now be trimmed to their final size. The endless variations are where the fun lies for me. The way they are bent and how long I leave them in relation to one another. This is a very simple wrap so it's easy to follow but you can make it as twisty and complicated as you like.

Where the wires have been cut can be a bit sharp and the last thing we want is sharp edges to catch on someones clothes. They can be filed, rounded with a cup burr or as I like curled. When curling the wires back against themselves it does away with any sharp edges and adds more interest.

I prefer to use my bail making pliers for uniformity in my bends but they can easily be done with round nose pliers too. Gripping the end of the wire I curl it back in one movement.





It should look like this.

This is repeated with the other 2 wires so that they look something like this. You can now see why I trimmed them this way.

The right hand wires can be warmed and bent similarly to the left hand wires only this time I have taken them further upwards.

The wires have been separated again in the same way as before.

I have trimmed the wires to their final length. They are different to the left hand side but I like asymmetry. You can bend and cut them any way it looks better to you.

The wires are now bent back on themselves.

When they have all been curled the piece is just about finished. By now I hope that I have created something pleasing to the eye. I always try to create pieces that are simple and elegant. I don't like to hide the stones beauty with a 'busy' wrap and try to compliment the stone. I will have tweaked the wires just to make them a little more as I want them and then the wrap is finished all bar the polishing.

As I have gone along and my style has improved I make more complex and hopefully beautiful designs.

My Sources Of Gemstones For Wire Wrapping

I am often asked where I manage to find the beautiful stones that I use in my jewellery designs. It isn't a completely straightforward answer I'm afraid.

I buy stones from a variety of sources. I have contacts in India, China, USA etc that I have made so that I can buy direct at good prices and as time goes by I'm sure you will make your own networking efforts pay off in similar ways. It's dealing with individuals you have known for a while and come to trust and it may often mean you need to bargain a little to get the best prices.

Ebay is always a good source for both strings and individual gems but you have to be cautious. Not all gemstones are genuine. China is particularly good at faking gemstones and sells them to unwary bidders in huge numbers. Once again you will come to know the better dealers and stick with them once you have had the opportunity to sample their wares.

Other jewellery makers can be a good source for acquiring gems in swaps. Everyone has stones in their stash that no longer seem as appealing or never did perhaps being bought as part of a bundle. For whatever reason there are stones you will probably never use and very many of us are gemstone addicts and can't help buying more and more gemstones. I have probably acquired enough gemstones to last me several lifetimes but I'm always attracted to pretty new things. What you can't use another can and swaps are commonplace and an easy way to get rid of your unwanted stones for someone else's.

Gem and rock shows are a gem addicts heaven (or hell if you run out of money). More lovely things than you could shake a big stick at and all at different quality and prices. It strikes me as madness to buy glass or plastic beads when genuine gemstones can be bought for little more and sometimes much less.

Online suppliers are everywhere and can be confusing in their sheer numbers. Depending on what I need at the time- and I buy a lot of things that are not gemstones such as tools, glue, wires etc - I go to different suppliers. It always pays to shop around if getting good prices are important to you.

My main source of gemstones is www.jewellerymaker.com which is a television sales channel. Their website is always good value for money and everything they sell is good quality. They have a 30 day no quibble returns policy which I know from personal experience is excellent. There is only one postage charge per day @ £2.95 for the UK no matter how much or how many items you order. They transmit 12 hours a day from 9 am to 9 pm before the show is uploaded to you tube and is a combination of live sales, demonstrations and masterclasses.

Experts demonstrate in a range of multi media subjects and is a very valuable resource for that alone. If you are able to watch the show live however is the best way to buy at VERY good, reduced prices. The presenters are knowledgable and amusing in their delivery and I enjoy the show very much. I usually have it on in the background until something of interest to me comes up either in a demonstration or gemstones and tools.

Please feel free to contact me on Facebook - https://www.facebook.com/wirewizardz or by email hargreaves_mark@sky.com and I'll do my best to help.

Umbron is my new Dragon Eye Pendant Design.

UMBRON

Julie has done me really proud once again with her creation of a new Dragon eye. His name is Umbron and I have wrapped him in pure copper. I'm hoping you will like him as much as I do as he is a fantastic colour. His story is below for you.


Umbron was known as a particularly viscious fighting Dragon. What he lacked in size and strength he more than made up for in sheer aggression. Look into his eyes and understand that he will do the unthinkable amongst Dragonkind. He won't just kill you but eat you too. He was destroyed following a match in the fighting cages of Ynysmon where blood lust drove him to attack and kill several high born fight fans.

Ooooh! What a naughty boy Umbron turned out to be! Not all my Dragon stories are sunshine and rainbows. I like them to have a little danger. Lol.




Umbron is now available in my store.

https://www.etsy.com/uk/listing/221753115/umbron-a-blue-dragons-eye-wire-wrapped

Doris - A Rose Quartz Wire Wrapped Pendant.

DORIS

Although she was now 86, Doris still insisted on wearing the black silk underwear that Sam had liked when he was alive. She had no illusions about how time had changed her body but in her mind she was still the same young girl that had raced around Cardiff on the back of Sam's motorcycle. A grin fixed on her face, eyes watering and the wind ruining the hair that she had taken so long making pretty for Sam. Life is what you make of it she said and her life had been an adventure full of opportunity.

https://www.etsy.com/uk/listing/221634265/doris-a-rose-quartz-wire-wrapped-pendant.

Pharoah rings Now posted on my Etsy store.

I usually make pendants as I love to make them but some days I get a hankering to make rings. I don't normally sell them as I make them for my own amusement mainly. Very often I send them out to my customers to thank them for orders, especially repeat customers.

I like to make simple rings and there are days that's all I do. I also find it very relaxing to make more complicated designs such as the Pharoah ring. They take a lot longer to make and even more so if I wrap the entire shank.

These are a couple of rings that I have listed in my store today and I hope to list a few more over the coming days.

https://www.etsy.com/uk/listing/221371269/adidron-a-dragon-eye-pharoah-ring-size

Dragon eye pharoah ring


















https://www.etsy.com/uk/listing/221367904/tigers-eye-pharoah-ring-size-w-11



Tigers eye pharoah ring

Best wishes - Mark xx

My New Etsy Store

I have been trialing 3 different stores to find one that best suits my needs. I have used Selz, Misi and Etsy. Selz has been my main store as it was easy and inexpensive to set up and easy to incorporate social media links.

I have fallen out of love with Selz as they have had a problem with their paypal integration for 6 weeks. That's far too long if you want to sell your items online. Who knows how many sales I may have had in that period?

I know it's only a hobby for me rather than a business but I still need those sales so I can buy in more raw materials. My hobby has become self funding. It allows me to do what I love and really keep my costs down.

Although I have had a couple of sales with both Etsy and Misi I have decided to throw in my lot with Etsy. It is far more well known and established for hobbyists and businesses alike. The costs aren't huge and the exposure for my items is pretty good. It loses out on Facebook integration though it does have some social media links.

I have moved all of my items from Selz and in the process of closing the store permanently with the loss of all the valuable links that I have set up for it over time.

The link to my new Etsy store is - https://www.etsy.com/uk/shop/WireWizardz.

Take a look if you get the chance and leave me any comments on the items and how I might improve them.

Best wishes - Mark xx

Making The Bail For our Wire Wrapped Pendant

Making Wire Wrapped Bails

Following on from my previous post where I showed you how to create the setting for the stone I will now outline a very simple way to make a bail.

Cut around 12" of half round wire. I find that wrapping the wire around my flat nose pliers makes a perfect fit to start wrapping for the bail. Holding the flat side down leave around 2" of wire sticking out to the left.

Using my thumb I will push the wire down and my finger to bend it around.

This can then be hung on the square wires above the setting.

It can now be wrapped around 4 times just like when we did the wraps for the setting. I am leaving my red guide wires on for now as they stop the square wires splaying out and bending before I want them to.

Taking my flat nose pliers I give the wrap a squeeze to tighten and smarten them up. I still want them to be able to move.

I now want to fix the setting in place and put it under tension to give it strength. A little above the top of the stone I will squeeze the wires together with flat nose pliers.

This will allow me to move the wrap I just did down as far as possible to lock everything together.

Having moved the wrap down I can remove the last of the red guide wires. Separate the front 2 wires and bend them forward a little.

Placing my thumb beneath them I bend them down tight on the wrap until they are sticking out in front. This locks the wrap in place stopping it moving back up.

There will now be 3 wires on each side that must be bent down. On the left side I place my thumb against the wrap again and bend the wires down until they are straight out. Repeat for the right side.

This is how it should look with all the wires bent down.

I like to use my bail making pliers to form the bail as it makes the job simple and uniform each time but any object can be used. Before I invested in bail making pliers I used a pen to create my bails.

Gripping the front 2 wires close to the 2 side wires I use my thumb to bend the wires up and back a little. I find this works much better than trying to use the pliers to make the bend.

Removing my pliers you can see that I have formed a shepherds hook.

Putting my pliers back in I can continue the bend until it is flat against the back of the stone and I can hold it tight with my thumb.

Using the longer of the 2 half round wires I want to wrap it completely around the bail covering the original 4 wires and leaving both wires sticking out at the back.

This is how it looks once I have wrapped it.

Taking my flat nose pliers I will give the wrap a squeeze just to tighten and straighten it.

Crossing over the two half round wires I twist them together for about 10mm.

I can cut off the excess leaving just under 10mm.

Gripping the little 'tail' that I left with my flat nose pliers I twist and straighten them. You have to be a little careful not to over tighten them or they will break off.

Making sure that they are equal, I part the 2 bail wires to give them greater visual interest as well as keeping them in place. If you find one is a little bigger than the other they can be aligned with a gentle tweak of your round nose pliers.

I'm going to tuck away the little 'tail' but before I can do that I need to part the 2 wires that are hanging down the back of the stone.

To tuck away the tail I take my round nose pliers and grip the end of the tail bending down and inwards.

Once I have made the tail into a hook I can easily push down on it which should place it neatly between the legs and up into the bail. It will hardly show from the front and it is a neat way of finishing it off.

I may need to apply a little pressure to the hook with the back of mu pliers to get it to go in far enough out of the way.

The same is true if it feels a little rough. Some gentle pressure with the back of the pliers will flatten it out and make it smooth.

If you are at all worried about it you can apply a small amount of glue once the legs have been pushed back in.

I use my flat nose pliers to bend the two wires in just below the tail to keep it in place.

I know that many jewellery makers give little thought to the back of the stone but I like to pretty it up a bit anyway. Cutting the legs to the size I want I can use my round nose pliers to give them a curl. This not only makes them more attractive but hides any rough edges from the cut. If you are not curling the wires back you may need to use a file or a cup burr to remove any sharp edges.

I will normally press the legs into the back of the stone so that they lie against it well and not stick out.

This is the stage I will do my initial polishing of the wires and stone with my silver cloth. Once I start bending the spare wires down it will be harder to get into all the little spaces with my polishing cloths or my dremel with a polishing wheel.

I will give it a full polishing once it is completed to make sure I remove any fingerprints etc.

That's the end of making the bail. In the next post I will begin bending down the wires into interesting shapes. This is the most fun part for me as I never know what I am going to do until I do it. This keeps my creations unique and different each time.